Flange Bushing Factory tells us that it is also important to plan to make things apart as needed. In the open, according to the drawings to discuss ways to open, order, query self-lubricating bearing cooperation conditions, in order to get the work of the full grasp of the work.
Open the interference of the outer ring, before the circumference of the shell set up several outer ring kneading screw with screws, one side evenly tighten the screw, while opening. These screw holes are usually covered with blind plug, tapered roller self-lubricating bearings and other self-lubricating bearings, in the shell on the shoulder to set a few cut off, the use of pad, with a press open, or quietly hit the open The
2, cylindrical hole self-lubricating bearing disassembly
The inner ring of the open, can use the pressure machinery to pull out the latest simple. At this point, pay attention to the inner ring to accept its pull force. Large self-lubricating bearing oil pressure and pull the card and use, to open the work. NU type, NJ cylindrical roller self-lubricating bearing inner ring can be used to open the induction heating method. In a short period of time to heat part of the inner ring after the expansion of the way.
3, taper hole self-lubricating bearing disassembly
Open the contrast with a small sleeve with self-lubricating bearing, with fastening on the shaft of the block to support the inner ring, the nut back several times, the use of pad with a hammer hit open.